Pengaruh Temperatur Sintesis Precipitated Calcium Carbonate (PCC) dengan Modifier Terhadap Ukuran dan Jenis Kristal

Syakirah, Miralda (2020) Pengaruh Temperatur Sintesis Precipitated Calcium Carbonate (PCC) dengan Modifier Terhadap Ukuran dan Jenis Kristal. Sarjana thesis, Universitas Brawijaya.

Abstract

Batu kapur dapat ditingkatkan nilai dan kualitasnya melalui proses sintesis Precipitated Calcium Carbonate (PCC). PCC banyak digunakan dalam industri kertas karena memiliki keunggulan ukuran partikel yang lebih seragam serta derajat kecerahan dan kemurnian yang lebih tinggi. Penelitian ini bertujuan untuk mengetahui pengaruh temperatur sintesis PCC dengan modifier terhadap ukuran dan jenis kristal, mengetahui pengaruh penambahan modifier terhadap ukuran partikel PCC serta mengetahui kondisi sintesis yang menghasilkan PCC yang dapat diaplikasikan dalam industri kertas. Penelitian ini menggunakan metode kajian pustaka berdasarkan literatur jurnal ilmiah dengan menggunakan satu jurnal PCC tanpa modifier dan lima jurnal PCC dengan modifier yaitu Sodium Deoxycholate (SDC), asam oleat, dodecyltrimethylammonium bromide (DTAB), etilen glikol, dan ethylenediaminetetraacetic acid (EDTA). Metode sintesis yang digunakan dari jurnal yang diteliti adalah metode kaustik soda dan karbonasi. Penentuan jenis kristal PCC menggunakan data hasil X-Ray Diffraction (XRD) dan penentuan ukuran partikel menggunakan data hasil Scanning Electron Microscope (SEM) dan Particle Size Analyzer (PSA). Berdasarkan hasil penelitian terhadap jurnal penelitian yang digunakan, temperatur reaksi mempengaruhi ukuran dan jenis kristal PCC dengan modifier. Jenis kristal kalsit terbentuk pada temperatur rendah (≤30°C), vaterit umum terbentuk pada temperatur ≥40°C, dan aragonit terbentuk pada temperatur tinggi ≥60°C. Semakin tinggi temperatur, ukuran PCC yang dihasilkan cenderung meningkat. Penambahan modifier mempengaruhi ukuran kristal PCC dengan menghasilkan ukuran yang lebih kecil dibanding dengan PCC tanpa modifier. Ukuran partikel yang dihasilkan sebesar 0,6‒10 μm. PCC yang dapat diaplikasikan sebagai filler dalam industri kertas diantaranya PCC yang disintesis dengan modifier DTAB dan EDTA.

English Abstract

Limestone can increase its value and quality through the synthesis of precipitated calcium carbonate (PCC). PCC is widely used in the paper industry because it has the advantages of more uniform particle size and higher brightness and purity. This study aims to determine the effect of synthesis temperature on PCC with modifier on size and crystal polymorph, determine the effect of modifier addition on particle size of PCC, and determine the synthesis condition produces PCC which can be applied in the paper industry. This research uses literature study method based on literature such as scientific journals. In this study, using one PCC journal without modifier and five PCC journals with different modifiers namely Sodium Deoxycholate (SDC), oleic acid, dodecyltrimethylammonium bromide (DTAB), ethylene glycol, and ethylenediaminetetraacetic acid (EDTA). The synthesis method used from the journals compiled are caustic soda and carbonation method. Determination of PCC crystal polymorph using X-Ray Diffraction (XRD) results data and to determine PCC particle size using Scanning Electron Microscope (SEM) and Particle Size Analyzer (PSA) result data. Based on the study results of the research journal used, reaction temperature effects on size and polymorph of PCC crystal with modifiers. Calcite is formed at low temperatures (≤30°C), common vaterites are formed at temperatures ≥40°C, and aragonite is formed at high temperatures ≥60°C. The higher reaction temperature is resulting particle size increased. The addition of modifiers increases the size of PCC crystals and produces smaller size compared to PCC without modifiers. The resulting PCC particle size is about 0,6‒10 μm. PCC which can be applied as fillers in the paper industry are PCC with DTAB and EDTA modifiers.

Other obstract

-

Item Type: Thesis (Sarjana)
Identification Number: 0520090292
Uncontrolled Keywords: PCC, modifier, temperatur, jenis kristal, filler, ukuran partikel
Subjects: 500 Natural sciences and mathematics > 546 Inorganic chemistry > 546.3 Metals, metallic compounds, alloys > 546.38 Alkali and Alkaline Metals, Group 1A > 546.393 Calcium
Divisions: Fakultas Matematika dan Ilmu Pengetahuan Alam > Kimia
Depositing User: ismanto
Date Deposited: 22 Feb 2021 10:16
Last Modified: 12 Apr 2023 07:14
URI: http://repository.ub.ac.id/id/eprint/183556
[thumbnail of DALAM MASA EMBARGO] Text (DALAM MASA EMBARGO)
SKRIPSI_Miralda Syakirah - Miralda Syakirah.pdf
Restricted to Registered users only until 31 December 2023.

Download (2MB)

Actions (login required)

View Item View Item