Pahlawan, Darni Mulia (2018) Pengaruh Variasi Agregat Daur Ulang (RCA) terhadap Kuat Lentur Balok Beton Normal Bertulangan Baja. Sarjana thesis, Universitas Brawijaya.
Abstract
Recycled Coarse Aggregate atau Agregat daur ulang merupakan beton sisa atau bongkahan beton yang sudah tidak digunakan dari pekerjaan konstruksi atau pengujian-pengujian yang telah dilakukan. Penggunaan recycled coarse aggregate ini bertujuan untuk mengurangi atau menganti agregat normal alam yang biasa digunakan dalam pekerjaan konstruksi. Dengan tingkat pembangunan yang sedang berkembang pesat di Indonesia, dikhawatirkan akan terjadi penambangan sumber daya alam secara besar-besaran. Disamping itu pula pemanfaatan agregat daur ulang ini juga belum begitu dimaksimalkan, sehingga bahan yang rusak ini hanya menjadi urugan atau dibuang begitu saja. Dampaknya dapat mengurangi tingkat kesuburan tanah disekitarnya. Dalam penelitian ini variasi yang digunakan adalah substitusi 100% komposisi agregat kasar daur ulang terhadap agregat normal alam. Benda uji yang akan dibuat yaitu balok beton berukuran 15 cm x 25 cm x 160 cm. Balok mengunakan tulang utama 2Φ-12. Pengujian yang akan dilakukan yaitu uji kuat lentur, lendutan. Untuk silinder beton dilakukan pengujian kuat tekan dan modulus elastisitas. Semua benda uji dilakukan perawatan selama 14 hari dan dilakukan pengujian pada saat umur 28 hari. Hasil dari pengujian balok beton menunjukkan bahwa beton dengan agregat daur ulang memiliki nilai yang lebih tinggi dalam menahan beban dibandingkan dengan beton agregat normal alam yaitu 1620 kgm banding 1575 kgm. Nilai lendutan yang terjadi pada balok beton agregat daur ulang yaitu 25,08 mm dan nilai lendutan balok beton normal yaitu 20,55 mm. Hasil dari pengujian kuat tekan silinder beton menunjukkan nilai kuat tekan aktual beton agregat daur ulang lebih tinggi dibandingkan beton agregat normal alam yaitu 29,78 MPa dan 26,23 MPa. Dengan nilai modulus elastisitas pada beton agregat daur ulang sebesar 56105,67 MPa dan beton agregat normal sebesar 35789,25 MPa.
English Abstract
Recycled Coarse Aggregate are residual concrete or concrete slabs that have not been used from construction work or tests that have been carried out. The use of recycled coarse aggregate aims to reduce or replace the normal natural aggregates commonly used in construction work. With the level of development that is rapidly growing in Indonesia, it is feared will happen the mining of natural resources massively. In addition also the utilization of recycled coarse aggregate is also yet so maximized, so this only damaged materials into a heap of soil or discarded casually. Its effects can reduce the level of the surrounding soil fertility. In this study the variations used are substitution 100% recycled coarse aggregate composition against normal aggregated nature. The test objects to be created that is concrete beams measuring 15 cm x 25 cm x 160 cm. Beam using 2Φ-12. Tests to be carried out are flexural strength, deflection test. For concrete cylinders the compressive strength and modulus of elasticity are tested. All tests performed maintenance for 14 days and do the testing at the time aged 28 days. The results of concrete beam testing show that recycled coarse aggregate concrete has a higher value of holding load compared to normal natural aggregate concrete, which is 1620 kgm compared to 1575 kgm. The deflection value thar occurs in recycled coarse aggregate concrete beams is 25,08 mm and the value of normal concrete beam deflection is 20,55 mm. The results of testing of concrete cylinder compressive strength showed that the actual compressive strength of recycled coarse aggregate concrete was higher than normal natural aggregate, which was 29,78 MPa and 26,23 MPa. The modulus of elasticity in recycled coarse aggregate concrete is 56105,67 MPa and normal natural aggregate concrete is 35789,25 MPa.
Other obstract
-
Item Type: | Thesis (Sarjana) |
---|---|
Identification Number: | SKR/FT/2018/1131/051812124 |
Uncontrolled Keywords: | Recycled coarse aggregate, kuat lentur, lendutan, kuat tekan, modulus elastisitas. Recycled Coarse Aggregate, Flexural Strength, Deflection, Compressive Strength and Modulus of Elasticity. |
Subjects: | 600 Technology (Applied sciences) > 620 Engineering and allied operations > 620.1 Engineering mechanics and materials > 620.19 Other engineering materials > 620.191 Soils and related materials |
Divisions: | Fakultas Teknik > Teknik Sipil |
Depositing User: | Budi Wahyono Wahyono |
Date Deposited: | 24 Apr 2020 14:20 |
Last Modified: | 28 Oct 2021 03:19 |
URI: | http://repository.ub.ac.id/id/eprint/167200 |
Preview |
Text
Darni Mulia Pahlawan (2).pdf Download (6MB) | Preview |
Actions (login required)
![]() |
View Item |