Amobilisasi Kromium Lumpur Limbah Pelapisan Logam dengan Semen Portland Pozzolan dan Zeolit Menggunakan Teknik Solidifikasi/Stabilisasi

Adriyani, LiesWuryanita (2011) Amobilisasi Kromium Lumpur Limbah Pelapisan Logam dengan Semen Portland Pozzolan dan Zeolit Menggunakan Teknik Solidifikasi/Stabilisasi. Sarjana thesis, Universitas Brawijaya.

Abstract

Logam kromium merupakan salah satu bahan buangan yang dihasilkan dari industri pelapisan logam yang dapat menimbulkan dampak buruk terhadap lingkungan. Upaya penanggulangan dapat dilakukan dengan teknik Solidifikasi/Stabilisasi (S/S), yaitu proses pemadatan limbah dalam matriks membentuk monolith. Tujuan penelitian ini adalah untuk mengetahui pengaruh komposisi semen dan zeolit terhadap kuat tekan monolith, Unconfined Compressive Strength (UCS) dan kemampuan monolith dalam mengikat logam Cr, dinyatakan dengan Toxicity Characteristic Leaching Procedure (TCLP). Pada penelitian ini monolith dibuat dengan mencampurkan lumpur limbah dengan semen dan zeolit. Perbandingan massa lumpur limbah dengan bahan aditif (semen dan zeolit) adalah 623 : 342. Faktor Air Semen (FAS) yang digunakan adalah 0,65. FAS merupakan perbandingan massa air terhadap total padatan. Komposisi limbah yang digunakan tetap dengan perbandingan variasi komposisi semen dan zeolit yang ditambahkan yaitu 1:4; 1:3; 1:2; 1:1; 2:1; 3:1; 4:1; dan tanpa penambahan zeolit. Uji UCS dan TCLP ditentukan setelah monolith dibiarkan selama 28 hari pada suhu ruang dan tekanan 1 atm. Uji UCS didasarkan pada kekuatan bahan terhadap pembebanan, sedangkan TCLP dilakukan dengan ekstraksi menggunakan asam asetat pH 2,88 ± 0,05 dan kadar Cr yang terlucut dari monolith dianalisis menggunakan Spektroskopi Serapan Atom (SSA). Hasil yang diperoleh menunjukkan bahwa kuat tekan monolith meningkat seiring bertambahnya semen. Komposisi semen dan zeolit juga berpengaruh terhadap perlucutan Cr, kemampuan maksimum monolith menahan Cr terjadi pada komposisi semen:zeolit yaitu 1:2.

English Abstract

Chromium is one of the waste from metal plating industry that have bad impact to environment. Solidification / Stabilization (S/S) technique used for processing the waste, compaction into matrix and it will become amonolith. The aim of this study to determine the effect of cement and zeolit composition of the monoliths compressive strength, Unconfined Compressive Strength (UCS) and the ability of monolith to bind Cr, expressed as Toxicity Characteristic Leaching Procedure(TCLP). In this study,monolithwas made by mixing sludge with cement and zeolite. The mass ratio of sludge and additive (cement and zeolit) was 623 : 342. Ratio water and total solid was 0,65. The variation of the composition of cement and zeolit were used 1:4, 1:3, 1:2, 1:1, 2:1, 3:1, 4:1, and without zeolit. UCS and TCLP’s tests was determined after monolith in the age of 28th day curing at room’s temperature (25oC, 1 atm). UCS test is based on the strength of material loading, and TCLP is done by extraction using acetic acid pH 2.88 ± 0.05 and Cr that released from monolithwas analyzed by Atomic Absorption Spectroscopy (AAS). The result showed that the compressive strength increase with cement composition increasing. The composition of cement and zeolit also affected the leaching of Cr. Maximum capability of binding Cr in monolith occurred at composition of cement : zeolit is1:2.

Item Type: Thesis (Sarjana)
Identification Number: SKR/MIPA/2011/188/051103086
Subjects: 500 Natural sciences and mathematics > 540 Chemistry and allied sciences
Divisions: Fakultas Matematika dan Ilmu Pengetahuan Alam > Kimia
Depositing User: Unnamed user with email repository.ub@ub.ac.id
Date Deposited: 05 Aug 2011 09:53
Last Modified: 22 Oct 2021 07:41
URI: http://repository.ub.ac.id/id/eprint/152643
[thumbnail of 051103086.pdf]
Preview
Text
051103086.pdf

Download (3MB) | Preview

Actions (login required)

View Item View Item