Pengaruh Perpindahan Panas terhadap Pyrolysis Yields Campuran Bambu dan Minyak Jelantah

Azha, Muhammad Faris (2019) Pengaruh Perpindahan Panas terhadap Pyrolysis Yields Campuran Bambu dan Minyak Jelantah. Sarjana thesis, Universitas Brawijaya.

Abstract

Minyak jelantah merupakan salah satu jenis limbah terbanyak di dunia. Karena sifatnya yang merusak dan memberi dampak buruk ke lingkungan serta kandungan asam lemak bebas yang tinggi, maka dirasa cukup penting untuk mengolah limbah minyak jelantah menjadi sesuatu yang lebih bernilai ekonomis. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh temperatur pirolisis terhadap perpindahan panas yang terjadi dan hasil pirolisis yang dihasilkan (pyrolysis yields). Metode yang digunakan adalah experimental. Pirolisis campuran serbuk bambu seberat 600 gram dan minyak jelantah seberat 244 gram dilakukan dengan waktu pirolisis 120 menit dengan variasi temperatur pirolisis sebesar 250°C, 350°C, 450°C, 550°C, 650°C. Perpindahan panas yang terjadi diukur dengan 8 titik thermocouple yang terhubung dengan data logger sebagai perekam temperatur aktual yang selanjutnya diolah menjadi bentuk diagram contour dengan software Origin. Hasil dari penelitian ini didapatkan hubungan antara temperatur pirolisis dengan perpindahan panas dan perubahan massa serta volume pada pyrolysis yields. Variasi termperatur pirolisis mempengaruhi perpindahan panas yang terjadi pada feedstock. Semakin temperatur pirolisis maka proses perpindahan panas yang terjadi akan semakin cepat. Sedangkan pada variasi temperatur pirolisis yang rendah, menghasilkan proses perpindahan panas yang lebih lambat. Variasi temperatur pirolisis juga mempengaruhi jumlah massa dan volume dari pyrolysis yields. Semakin tinggi temperatur operasi pirolisis akan menghasilkan jumlah massa dan volume pyrolysis yields yang lebih sedikit. Begitu pula sebaliknya, semakin rendah temperatur operasi pirolisis maka jumlah massa dan volume pyrolysis yields akan lebih banyak.

English Abstract

Waste cooking oil is the one of the most types of waste in the world. Since it has destructive and detrimental effect on the environment and high content of free fatty acids, it is considered important to process waste cooking oil into something more economical. Main objective of this experiment is to find the effect of pyrolysis temperature on heat transfer occurs and pyrolysis products produced (pyrolysis yields). Experimental methods are used in this study. Pyrolysis of mixed bamboo with a mass 600 grams and waste cooking oil with a mass 244 grams was carried out with 120 minute pyrolysis time with variation of pyrolysis temperature of 250°C, 350°C, 450°C, 550°C, 650°C. The heat transfer that occurs is measured by 8 thermocouple that connected to the data logger as the actual temperature recorder which then processed into a contour diagram with Origin software. The results of this study found that pyrolysis temperature gave an effect on heat transfer occurs and changed in mass and volume in pyrolysis yields. The variation of pyrolysis temperature affected the heat transfer that occured in the feedstock. The higher pyrolysis temperature, the faster the heat transfer process would occur. When at the low pyrolysis temperature variations, the process of heat transfer would be slower. Variations of pyrolysis temperature also affected the amount of mass and volume of pyrolysis yields. The higher temperature of the pyrolysis would produced less mass and volume of pyrolysis yields. And vice versa, lower temperature of the pyrolysis, more mass and volume of pyrolysis yields would be produced.

Other obstract

-

Item Type: Thesis (Sarjana)
Identification Number: SKR/FT/2019/477/051905073
Uncontrolled Keywords: Pirolisis, Perpindahan Panas, Bambu, Minyak Jelantah. Pyrolysis, Heat Transfer, Bamboo, Waste Cooking Oil
Subjects: 600 Technology (Applied sciences) > 628 Sanitary engineering > 628.4 Waste technology, public toilets, street cleaning > 628.44 Solid wastes (Refuse) > 628.445 Treatment and disposal > 628.445 8 Conversion into useful products
Divisions: Fakultas Teknik > Teknik Mesin
Depositing User: Budi Wahyono Wahyono
Date Deposited: 24 Aug 2020 06:58
Last Modified: 24 Aug 2020 06:58
URI: http://repository.ub.ac.id/id/eprint/172914
Full text not available from this repository.

Actions (login required)

View Item View Item