Pengaruh Eksentrisitas Pada Struktur Portal Dengan Bracing Tipe V Akibat Beban Lateral Terhadap Tegangan dan Regangan Struktur

Dinatra, Iqbal Rizky (2019) Pengaruh Eksentrisitas Pada Struktur Portal Dengan Bracing Tipe V Akibat Beban Lateral Terhadap Tegangan dan Regangan Struktur. Sarjana thesis, Universitas Brawijaya.

Abstract

Negara Indonesia merupakan salah satu negara yang rawan akan terjadinya gempa bumi. Hal ini disebabkan karena Indonesia dilewati oleh cincin api pasifik. Gempa bumi tentu dapat merusak struktur bangunan mulai dari retaknya struktur hingga kegagalan struktur yang mengakibatkan bangunan roboh. Oleh karena itu, diperlukan usaha untuk memenuhi kebutuhan berupa bangunan bertingkat tinggi yang tahan terhadap gempa. Salah satu caranya adalah dengan menambahkan pengaku (bracing) pada struktur bangunan. Pada umumnya, bracing ditempatkan menyilang dengan konfigurasi bervariatif pada bagian dalam portal struktur tersebut. Pada penilitian ini dibuat tiga buah benda uji portal. Benda uji portal tersebut dibuat menggunakan beton bertulang yang terdiri dari balok dengan panjang 100 cm, kolom dengan tinggi 70 cm serta bracing yang membentuk huruf V. Portal F tanpa jarak eksentristias, portal G memiliki eksentrisitas 15 cm dan portal H memiliki eksentrisitas 25 cm. Mutu beton yang digunakan adalah K-175. Tulangan utama yang digunakan adalah 4-Ø6 mm dan tulangan geser Ø4-150 mm. Pengujian dilakukan dengan menggunakan alat load cell untuk memberikan beban lateral, LVDT untuk memperoleh nilai defleksi, dan strain gauge untuk memperoleh nilai regangan. Benda uji portal G menghasilkan tegangan maksimum 82,54% dari benda uji F untuk baja dan 74,29% dari benda uji F untuk beton. Sedangkan untuk benda uji H menghasilkan tegangan maksimum 69,84% dari benda uji F untuk baja dan 62,86% dari benda uji F untuk beton. Sedangkan untuk nilai regangan, Benda uji portal G memiliki regangan maksimum 212,29% dari benda uji F untuk baja dan 177,39% dari benda uji F untuk beton. Sedangkan untuk benda uji H memiliki regangan maksimum 133,45% dari benda uji F untuk baja dan 617,68% dari benda uji F untuk beton.

English Abstract

Indonesia is one of the countries vulnerable to earthquakes. This is because Indonesia is passed by the Pacific ring of fire. The earthquake certainly can damage the structure of the building from the cracking of the structure to the failure of the structure which is make the building collaps. Therefore, something is needed to meet the needs of high-rise buildings that are earthquake resistant. On of them is by adding bracing to the structure of the building. In general, bracing is placed crossed with a varied configuration on the inside of the portal structure. In this research, three portal specimens were made. The portal specimens were made using reinforced concrete consisting of 100 cm long blocks,columns 70 cm highand bracing that formed the letter V. Portal F is made without eccentricity distance, portal G has a 15 cm eccentricity and portal H has a 25 cm eccentricity. The quality of the concrete used K-175. The main reinforcement used is 4-Ø6 mm and stirrup Ø4-150 mm. The testing is used load coal to give the loads lateral, LVDT to obtain deflection values, and strain gauge to obtain the values of the strain. Based on the results of this research, it was found that the portal G specimen produced a maximum stress of 82.54% of the F specimen for the steel and 74.29% of the portal F specimen for the concrete. While for the portal H specimen produced a maximum stress of 69.84% of the F specimen for the steel and 62.86% of the F specimen for the concrete. And then for the portal G has a maximum strain 212.29% of the portal F for the steel and 177.39% of the portal F for the concrete. Then for the portal H has a maximum strain 133.45% of the portal F for the steel and 617.68% of the portal F for the concrete.

Other obstract

-

Item Type: Thesis (Sarjana)
Identification Number: SKR/FT/2019/663/051905289
Subjects: 600 Technology (Applied sciences) > 624 Civil engineering > 624.1 Structural engineering and underground construction > 624.17 Structural analysis and design
Divisions: Fakultas Teknik > Teknik Sipil
Depositing User: Budi Wahyono Wahyono
Date Deposited: 24 Aug 2020 06:51
Last Modified: 24 Aug 2020 06:51
URI: http://repository.ub.ac.id/id/eprint/171541
Full text not available from this repository.

Actions (login required)

View Item View Item