Pengaruh Ion Asing Terhadap Kinerja Elektroda Pasta Karbon Berbasis S-Methyl-N-(Methylcarbamoyloxy)Thioacetimidate Untuk Penentuan Kandungan Timbal(II) Dalam Kosmetik

Hani`in, Khoirul (2016) Pengaruh Ion Asing Terhadap Kinerja Elektroda Pasta Karbon Berbasis S-Methyl-N-(Methylcarbamoyloxy)Thioacetimidate Untuk Penentuan Kandungan Timbal(II) Dalam Kosmetik. Sarjana thesis, Universitas Brawijaya.

Abstract

Penelitian tentang pengaruh ion asing terhadap kinerja Elektroda Pasta Karbon (EPK) timbal(II) berbasis S-methyl-N- (methylcarbamoyloxy) thioacetimidate atau senyawa methomyl telah dilakukan, dengan komposisi optimum EPK timbal(II) berbasis methomyl yaitu karbon aktif : DOP : methomyl dengan perbandingan 0,5 : 0,4 : 0,1. Tujuan dari penelitian ini adalah pertama menentukan koefisien selektivitas EPK timbal(II) berbasis methomyl terhadap ion pengganggu yaitu ion natrium, kadmium, dan merkuri. Kedua, menentukan kandungan timbal(II) dalam sampel kosmetik dan dibandingkan dengan hasil yang didapat dengan metode spektrofotometri. Konsentrasi linier dari larutan timbal(II) yang diuji adalah 1x10-1– 1x10-5 M pada pH 6. Koefisien selektivitas (Kij) ditentukan menggunakan metode larutan tercampur, ion utama yang digunakan adalah ion Pb2+, dengan ion asing Na+, Cd2+, dan Hg2+ dengan konsentrasi ion asing dibuat tetap 10-3 M. Hasil dari penelitian menunjukkan bahwa EPK timbal(II) berbasis methomyl memiliki selektivitas yang baik terhadap ion timbal(II) (Pb2+) dengan nilai Kij<1. Kinerja EPK timbal(II) berbasis methomyl tidak diganggu oleh adanya ion asing natrium (Na+), kadmium (Cd2+), dan merkuri (Hg2+) dengan urutan selektivitas Pb2+ > Hg2+> Cd2+ > Na+. EPK timbal(II) berbasis methomyl yang telah dibuat dapat digunakan untuk menentukan kandungan timbal(II) dalam sampel kosmetik yaitu krim pemutih wajah A dan B dengan kadar dari kedua sampel berturut-turut adalah 2,12 ppm dan 9,33 ppm. Uji statistik t dengan tingkat kepercayaan 95% menunjukkan bahwa metode potensiometri dan metode spektrofotometri serapan atom (SSA) tidak berbeda secara bermakna.

English Abstract

The research of the effect of interfering ion to performance of Carbon Paste Electrode (CPE) lead(II) based on S-methyl-N- (methylcarbamoyloxy)thioacetimidate or methomyl compound has been investigated, with the optimum composition of CPE lead(II) based on methomyl of activated carbon : DOP : methomyl with ratio 0,5 : 0,4 : 0,1. The aim of this research is first to determine the selectivity coefficient of CPE lead(II) based on methomyl to interfering ions including sodium, cadmium, and mercury ions. Second aim was to determine the concentration of lead(II) in cosmetic samples and compared with the results from the spectrophotometric method. Linear concentration of lead(II) that examined was 1x10-1 - 1x10-5 M at pH 6. Selectivity coefficient (Kij) was determined by mixed solution method, with main ion Pb2+ and with interfering ions are Na+, Cd2+, and Hg2+, the concentration of interfering ion keep in 10-3 M. The research showed that the CPE lead(II) based on methomyl has good selectivity to ion lead(II) (Pb 2+) with the value of Kij <1. The performance of CPE lead(II) based on methomyl not be interfered by the presence of interfering ion of sodium (Na+), cadmium (Cd2+), and mercury (Hg2+) with selectivity Pb2+ > Hg2+ > Cd2+ > Na+. CPE lead(II) based on methomyl could be applied to determine lead(II) in sample of cosmetics, that is skin whitening creams A and B with the concentration from each sample are 2.12 ppm and 9.33 ppm. Based on t statistical test with 95% confidence limit shows that potentiometric method and atomic absorption spectrophotometry (AAS) method were not significantly different.

Item Type: Thesis (Sarjana)
Identification Number: SKR/MIPA/2016/430/051610367
Subjects: 500 Natural sciences and mathematics > 540 Chemistry and allied sciences
Divisions: Fakultas Matematika dan Ilmu Pengetahuan Alam > Kimia
Depositing User: Kustati
Date Deposited: 02 Nov 2016 10:19
Last Modified: 02 Nov 2016 10:19
URI: http://repository.ub.ac.id/id/eprint/154965
Full text not available from this repository.

Actions (login required)

View Item View Item